09:45 <machinehum> apritzel: Thankyou for your A523 work

09:48 <machinehum> Thanks everyone, rather

15:20 <BroderTuck> junari: Hey. Am I reading it right that you managed to get the emmc working on your walnitpi?

15:22 <junari> partially yes. Do you have walnutpi too?

15:22 <BroderTuck> Nu, just an x96qpro+

15:23 <junari> Doesn't x96qpo+ have this feature out of the box?

15:28 <BroderTuck> Maybe with the right tweaks, I'm just getting "[ 1.346254] sunxi-mmc 4022000.mmc: card claims to support voltages below defined range [ 1.350539] mmc1: error -110 whilst initialising MMC card" tho

15:34 <junari> On my x96qproplus I see the following message:

15:34 <junari> [ 1.697400] mmc2: new HS200 MMC card at address 0001 [ 1.698248] mmcblk2: mmc2:0001 BJTD4R 29.1 GiB

15:36 <junari> Ahh, I see, I lowered the bus frequency to 25 MHz

15:39 <junari> I noticed that walnutpi has the voltage value for emmc io set to 2.1v, so I set it in mainline as well. Now I can use it to store files and under some conditions it is possible to start the system with emmc

15:40 <BroderTuck> Adt tweak, or something else?

15:40 <junari> adt?

15:40 <BroderTuck> *a dt*

15:41 <junari> Yes, only dt

15:42 <junari> right now my walnutpi is running at 150 MHz. Has anyone checked the io voltage for x96qproplus?

15:44 <junari> https://gitlab.manjaro.org/iuncuim/linux/-/blob/master/1205-arm64-dts-allwinner-a523-X96Q-Pro-add-sdio-wifi-node.patch?ref_type=heads

15:52 <BroderTuck> I'm just wondering of there are any other changes in that repository that amight affect thisl.

15:59 <junari> I haven't touched any other things as far as I can remember. But maybe I forgot something since I haven't done it for the last month

16:02 <junari> My last attempts were to set the speed bin to select voltages. But it seems AW's job is to write as much confusing stuff as possible when

17:06 <apritzel> junari: so are you saying you are advertising a 1.8V I/O voltage, but need to "overclock" this by 300mV?

18:19 <electricworry> apritzel: Just wanted to say thanks for the sunxi-fel script. I've got everything working now. The FEL transfer is a little slow - 45 seconds with an Image.gz of 11M. Does that seem typical?

21:02 <apritzel> electricworry: yes, FEL mode is quite slow, speed depends on the particular BootROM, and H616 is a bit more than 300KB/s

21:59 <electricworry> apritzel: Thanks! BTW, would you be ok with me including that script you sent as part of a public repo with attribution? And if so, is there a particular license or just PD you'd be happy with??

23:20 <apritzel> electricworry: for that script I don't really care, attribution sounds fine, so make it PD or GPL, whatever suits you better