06:07 <parthiban> apritzel MasteR3C0RD Morning, Managed to resume A133 and got the TF-A working with secondary CPU. But with the memory map for SRAM https://pastebin.com/raw/Ce124K6W am still using the H6. Using A133's results overflow as the A1 section is only 16KB. I have tried using DRAM, but couldn't make it work. Could you please recommended / suggest? Thanks

07:31 <paulk> mhh I can't get ethernet to work at all on my sipeed lichee pi zero dock, neither in linux or u-boot

07:31 <paulk> the pinecube (using s3, lichee pi is v3s) work normally

07:31 <paulk> both are using the emac + internal phy

08:25 <paulk> mhh turns out there's no contact at all between the pins inside the connector and outside the connector, first time I'm seeing this...

08:32 <paulk> or maybe it has some coils inside

10:00 <apritzel> paulk: I think there are RJ45 connectors with built-in magnetics

10:04 <apritzel> and yes: according to its datasheet, this HanRun HR911105A is a: "Single Port RJ45 Connector with Integrated Magnetics and LED for 10/100Base-T NIC Applications"

10:08 <paulk> good catch!

10:09 <paulk> pinecube has a direct connection apparently

10:09 <paulk> I'll try with my s3-olinuxino which also has magnetics.

13:57 <paulk> well it works on s3-olinuxino so I might just have a bad board

16:05 <apritzel> paulk: you mean #1 software engineer's excuse: must be bad hardware? ;-)

16:52 <paulk> apritzel: haha guilty yes :)

16:53 <paulk> to be fair I ordered another unit to check

17:14 <apritzel> parthiban: thanks for the A133 TF-A patches! Did you try to integrate this into the H6 platform?