10:33 <apritzel> Lightsword: the SID device is always secure, so you cannot switch it over (like you can do with other devices, with the SPC), nor can you do this for single bits, of course

10:36 <apritzel> Lightsword: but you can read the fuse and put that information in the devicetree. Not sure how much you trust the DT in your context, though

10:37 <apritzel> and do you need that bit to be in the location where it is? Can't you put that (or copy that?) into the earlier SID words, which should be readable from the kernel

10:42 <ing_warn> Seems like 6.1.120 introduces my usb gadget issue.

11:46 <captainSail> apritzel: regarding yesterday's conversation. I tested u-boot on a feta40i-c module. High-speed usb didn't work on this module either. That same reset issue. Today I ran u-boot on a bpi m2 berry, and u-boot's usb worked on this board!

12:07 <apritzel> captainSail: yes, I tried it on my M2-Berry as well yesterday, and saw it indeed working there

12:07 <apritzel> IIRC the board uses a USB hub? that might make a difference

16:24 <Lightsword> apritzel, that specific version bit is BROM enforced AFAIU, I guess maybe I can build images with it maxed out so that the build version is always greater than the efuse anti-rollback version?