05:08 <diego71> hello, I'm trying to build u-boot for radxa cubie a53, and I'm stuck in building arm-trusted-firmware

05:09 <diego71> this what i'm doing: http://paste.debian.net/1389396/

08:35 <dlan> try "make CROSS_COMPILE=aarch64-linux-gnu- PLAT=sun55i_a523", no 'bl31'

08:56 <diego71> dlan: I've tried. It compiles things, but I don't find any bl31.bin created

09:01 <diego71> http://paste.debian.net/1389436/

09:03 <dlan> works for me, you should find build/sun55i_a523/release/bl31.bin

09:06 <dlan> the only difference is I'm using the toolchain generated from Gentoo..

09:07 <dlan> no useful info from above paste log.

09:08 <dlan> you probably could add "V=1" to make the compiling process more verbose

09:08 <diego71> good idea

09:09 <diego71> nothing useful. It seems it does not have any target bl31.bin, maybe some problem with make version

09:09 <diego71> $ make -v

09:09 <diego71> GNU Make 4.3

09:12 <dlan> 4.4.1 here, but I doubt it's the problem

09:12 <dlan> actually the target is "bl31", not "bl31.bin"

09:13 <dlan> and by giving a "bl31" explicitly, it works here

09:16 <diego71> ok, i've tried with a clean vm with debian trixie, same commands and it worked... I wonder why

09:16 <diego71> make 4.4.1

09:17 <diego71> it was the make version or something in my settings

09:18 <dlan> ok, once you figure out, let me know..

09:18 <diego71> thanks dlan

09:18 <dlan> does the two vm use the same gcc (the toolchain)?

09:28 <dlan> wens: btw, do you work on gmac1 driver of A523? it's actually GMAC200 in docs

09:45 <apritzel> diego71 check if you have a BL31 environment variable set, for instance from a U-Boot build

09:45 <apritzel> that seems to upset TF-A, and it will just build its libc

10:05 <bpye> Apologies if this is a bad place to ask - but does the h616 config in alsa-ucm-conf actually work? I see the headphone jack events on my device with amixer, but nothing changes the "Speaker Switch" control

10:05 <bpye> I really don't know where to begin in debugging it...

12:18 <wens> dlan: yes, I already posted v1 on the mailing list

12:42 <dlan> wens: indeed, I missed it.. thanks

12:55 <diego71> apritzel: indeed, BL31 was set to a previous version build of bl31.bin. Thanks

15:56 <DirectGaming_> Hi!

15:56 <DirectGaming_> I feel Really stupid right now, I've never used IRC and just found that I had to Verify to even send messages here :/

15:58 <DirectGaming_> So, I'll reask now since people can see what I typed. I'm in need of some help with U-Boot on this AllWinner H313 Device I have, I've gotten Access to the UART and I've just now been able to find that this Device shares the same RX issue as the T95 so I've sorted that issue out so I can now Send Commands Over, However, I can't seem to get it out of AutoBoot. It seems to skip right past the hit any key: 0 prompt, Does anyone know any ideas?

15:58 <DirectGaming_> I've also tried compiling a Uboot Bin for this device to boot over FEL to no success, It seemed to Time out the device and hang :/

16:17 <DirectGaming_> ok, i found out i can just do reboot uboot on this device and it worked :/