00:49 <owrt-images-builds> Build [#157](https://buildbot.openwrt.org/images/#/builders/70/builds/157) of `openwrt-24.10_mvebu/cortexa53` completed successfully.

08:48 <ax89x> hi all

08:49 <ax89x> last night i try to build ax89x with enabled pci-e and i got pci-e port

08:49 <ax89x> i got some error in dmesg

08:50 <ax89x> here is what is detect in lspci

08:50 <ax89x> root@OpenWrt:~# lspci 0000:00:00.0 PCI bridge: Qualcomm Technologies, Inc Device 1002 0001:00:00.0 PCI bridge: Qualcomm Technologies, Inc MDM9x55 LTE Modem [Snapdragon X16]

08:52 <ax89x> and here is some erroe

08:52 <ax89x> root@OpenWrt:~# dmesg | grep -i pci [ 0.107736] PCI: CLS 0 bytes, default 64 [ 0.127128] qcom-pcie 20000000.pci: host bridge /soc@0/pci@20000000 ranges: [ 0.127193] qcom-pcie 20000000.pci: IO 0x0020200000..0x002020ffff -> 0x0000000000 [ 0.127198] qcom-pcie 10000000.pci: host bridge /soc@0/pci@10000000 ranges: [ 0.127222] qcom-pcie 20000000.pci: MEM 0x0020220000..0x002fffffff -> 0x0020220000 [ 0.12723

08:52 <ax89x> qcom-pcie 10000000.pci: Read DBI address failed

08:53 <ax89x> qcom-pcie 10000000.pci: Invalid eDMA IRQs found

08:54 <ax89x> what i can do with thet port ? is it posable to i must put only device MDM9x55 LTE Modem [Snapdragon X16] or can ise thet port for other devices

12:09 <djfe> what did you connect via m.2?

12:10 <djfe> Also helping you remotely will likely be difficult for most people. tinkering is cool but we can't use tools on the ports to remotely check what runs on those pcie lanes

12:10 <djfe> *m.2 like lanes

17:52 <swalker> updated openwrt/upstream, https://sdwalker.github.io/uscan/index.html