15:36 <intelinsidecomputer[m]> Hello I am Newbie to Qualcomm phones, and wanted to dump the firmware before making twrp for it and then android roms and then maybe pmOS and port lk2nd, but booted in FFBM Mode and cannot get out of it, could someone help me? Power on and Volume Down reboots back to that mode and power off button does nothing. ADB says unauthorized device and I cannot reboot from there.

15:37 <intelinsidecomputer[m]> * lk2nd, but i booted in, * does nothing at all. ADB

17:09 <NekoCWD[m]> use edl

17:15 <intelinsidecomputer[m]> Cannot reboot to that either

17:39 <intelinsidecomputer[m]> [@nekocwd:mainlining.org](https://matrix.to/#/@nekocwd:mainlining.org)

17:40 <barni2000[m]> <intelinsidecomputer[m]> "Hello I am Newbie to Qualcomm..." <- try vol d+vol u+power

17:42 <intelinsidecomputer[m]> barni2000[m]: Nope the same result

17:42 <intelinsidecomputer[m]> Can't I bypass that unauthorized thing on adb somehow?

17:42 <barni2000[m]> can you deattach the battery?

17:43 <intelinsidecomputer[m]> barni2000[m]: Not really, without dissasembling no

17:43 <intelinsidecomputer[m]> I don't want to damage it

17:43 <barni2000[m]> which device is it?

17:44 <intelinsidecomputer[m]> barni2000[m]: Doro 8050

17:46 <barni2000[m]> oh it is letv, ig display comes of first for reach the batery

17:47 <intelinsidecomputer[m]> Should I use an heat gun

17:51 <barni2000[m]> wait

17:51 <barni2000[m]> some key combo should help you

17:51 <barni2000[m]> i would check dmesg -w on your computer until you try too reboot it

17:52 <barni2000[m]> you should push to buttons around 30 sec

17:56 <intelinsidecomputer[m]> barni2000[m]: Nvm I got an idea, I will just take an hair dryer heat the phone and take off the panel, it is half glued half mounted like these back panels you can take off on Androids with batteries

17:56 <barni2000[m]> it is still risky i have killed a panel like that

18:03 <intelinsidecomputer[m]> <barni2000[m]> "it is still risky i have..." <- My friend had an s20 Fe and from gaming and the heat from the phone the back panel just fell off, that was funny, I will use the same practice, only that I will make some breaks, one section glue has melted, make it not touch the phone, wait some time, do with other section that has glue, I don't know how to verbally explain

18:06 <intelinsidecomputer[m]> Okay did it 35 % of all the phone, screen looks good, works how it worked, but the phone is bit hot, now inserted the tweezer to not make the panel glue again and now I'm waiting for it to cool down

18:16 <intelinsidecomputer[m]> Now I'm stuck on ts bump, what should I do?

18:18 <intelinsidecomputer[m]> Nvm there are screws there, now I'm finding the correct screw tip

18:21 <barni2000[m]> idk how this phone was assembled

18:21 <intelinsidecomputer[m]> barni2000[m]: Me too, I disassembled it😎

18:22 <barni2000[m]> Was it even glued?

18:26 <intelinsidecomputer[m]> barni2000[m]: Yes

18:28 <intelinsidecomputer[m]> Yes yes yes I fixed it!!!!

18:32 <intelinsidecomputer[m]> Now I have to find an way to flash stuff on it

18:32 <intelinsidecomputer[m]> Some loader

18:36 <intelinsidecomputer[m]> Also I shorted something the vibrator works whenever it wants, maybe an good reboot will fix it

19:04 <intelinsidecomputer[m]> Btw are these glitches GPU's fault or the game's fault?

19:04 <intelinsidecomputer[m]> Does not appear on other games I tested

19:05 <barni2000[m]> intelinsidecomputer[m]: pmos, mainline which soc?

19:05 <barni2000[m]> A306A have issues something like this

19:06 <intelinsidecomputer[m]> barni2000[m]: Stock android 9, qm 215

19:07 <intelinsidecomputer[m]> Some Roblox client strapped to an server does not have these bugs, everything ran good, no artifacts, graphical glitches, nothing, wait this was before I dissasembled, gonna try again

19:09 <intelinsidecomputer[m]> Yup Roblox 2017 works perfectly

19:09 <intelinsidecomputer[m]> * Some old Roblox client