ChanServ changed the topic of #msm8937-mainline to: Boot Linux on your MSM8917/37/40 and QM215 mobile! | GitHub: https://github.com/msm89x7-mainline | Logs: https://oftc.irclog.whitequark.org/msm8937-mainline | Bridged to #msm8937-mainline:kde.org on Matrix
DaRock has quit [Ping timeout: 480 seconds]
<barni2000[m]> Have you enabled memory region?
<barni2000[m]> Show me your dt
<barni2000[m]> Wifi is working on pine
<abraxane[m]> <barni2000[m]> "Have you enabled memory region?" <- wcnss_mem? yes
<abraxane[m]> dt
<abraxane[m]> wcnss is commented because i did so after my tinkering
<dr_shui[m]> barni2000: why there is panel mods but not loaded and works?
<barni2000[m]> dtc /sys/firmware/fdt | grep panel
<dr_shui[m]> shows that
<barni2000[m]> lk2nd is not working
<dr_shui[m]> oh no
<dr_shui[m]> is making mbr is nessesary? it's so hard for me
<barni2000[m]> why? parted can do that
<dr_shui[m]> how to mix ext-2 boot.img and ext-4 root.img into one img ?
<barni2000[m]> btw i have the same panel and it is working for me
<barni2000[m]> you can make partitions in 1 file
<dr_shui[m]> i know how to make partition in real disk but don't know how to do it on .img files
<dr_shui[m]> i asked chatgpt, but seems it haven't a solution for me😂
<dr_shui[m]> mount my root.img, and do it on the mount point ?
<barni2000[m]> `fallocate -f <size>G <your filename>`
<barni2000[m]> s/f/l/
<barni2000[m]> `fdisk <your file name>`
<barni2000[m]> o w
<barni2000[m]> ❯ file file
<barni2000[m]> file: DOS/MBR boot sector
<dr_shui[m]> ok, i'll try, thank you so much barni
<barni2000[m]> ❯ file file
<barni2000[m]> file: DOS/MBR boot sector; partition 1 : ID=0x83, start-CHS (0x0,32,33), end-CHS (0x41,69,5), startsector 2048, 1046529 sectors; partition 2 : ID=0x83, start-CHS (0x41,101,37), end-CHS (0x82,138,8), startsector 1050624, 1046528 sectors
<barni2000[m]> it contains now 2 partition what i can format
<barni2000[m]> do you know where can i buy display for xiaomi-prada?
<barni2000[m]> i have checked AE but there is none, also i have not find any on ebay
<dr_shui[m]> chinese Taobao or Xianyu（goofish）can buy
<dr_shui[m]> RMB ￥28 barni2000
<Danct12[m]> <barni2000[m]> "do you know where can i buy..." <- probably aliexpress or just buy another used phone
<barni2000[m]> i have checked aliexpress i have only found redmi 4 prime (markw) display there
<Danct12[m]> i would recommend the latter if you're going to make sure that you're getting the original parts because the screens that are available right now are likely TFT
<Danct12[m]> at least that's the case for santoni
<barni2000[m]> for my santoni i have got decent replacement display but for redmi 7a and for redmi go they are usable but bad quality
<barni2000[m]> but i have got an redmi 7a display on local market for almost free
<barni2000[m]> but prada is a rare device
<Danct12[m]> barni2000[m]: good for you
<Danct12[m]> i got a display with frame that the earpiece doesn't even fit
<Danct12[m]> and the screen is broken on latest lineageos
<Danct12[m]> which is fun
<barni2000[m]> btw you will never got orignal display except if you buy an used device
<barni2000[m]> Danct12[m]: is it working with pmos?
<Danct12[m]> barni2000[m]: never tried
<barni2000[m]> funfact i had buy same replacement display from same seller for midos and they were different :D
<aka_[m]> tps://pl.aliexpress.com/item/1005009025116212.html
<aka_[m]> [@barni2000:matrix.org](https://matrix.to/#/@barni2000:matrix.org) ?
<barni2000[m]> this is markw